Osram HTM150 Transfo 50-150W

  • Beschrijving
  • Meer
  • Specificaties

osram_logo3 Transfo 50-150W

Electrical data

Lamp wattage 50…150 W
Line current 0.57 A
Power factor λ 0.99
Operating frequency 40 kHz
Nominal output voltage 11.4 / 11.5 V
Input voltage AC 230…240 V
Mains frequency 50…60 Hz
System wattage 157.00 W
Input voltage range AC 207…264 V
Max. no. of ECGs on circuit breaker 10 A 16
Max. no. of ECGs on circuit breaker 16 A 26
ECG efficiency 95 %
Galvanic isolation primary/secondary 4.00 kV
Inrush current 1.1 A

Dimensions & weight

Length 153.0 mm
Width 54.0 mm
Mounting hole spacing, length 146.0 mm
Height 36.0 mm
Mounting hole spacing, width 15.0 mm
Cable cross-section, input side 1.5 mm²
Cable cross-section, output side 2.5 mm²
Wire preparation length, input side 12 / 8.0 mm
Wire preparation length, output side 12 / 8.0 mm
Product weight 185.00 g


Ambient temperature range 0…+45 °C
Maximum temperature at tc test point 80 °C

Additional product data

Design / version Compact with cable clamp


Dimming method Trailing- or leading-edge phase control for inductive load dimmers
Overload protection Automatic reversible
Overheating protection Automatic reversible
Short-circuit protection Automatic reversible
Max. cable length to lamp/LED module 2.0 m
Cable types, input side NYM 3x1.5 / H05VV-F 3x1.0 / H03VV-F 3x1.5 mm²
Cable types, output side NYM 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.0 / H05VV-F 2x1.5 / H03VV-F 2x0.75 / H03VV-F 2x1.5 mm²
Dimmable Yes
Dimming range 0…100 %
No-load proof Yes
Suitable for fixtures with prot. class II

Certificates & standards

Approval marks – approval VDE / VDE-EMC / E1 approval / GOST
Standards Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61047
Type of protection IP20
Geschik voor Wattage 50 tot 150W
Type Electronisch
Gerelateerde Producten