Osram HTL225 Transfo 50-225W

  • Beschrijving
  • Meer
  • Specificaties
osram_logo3 Transfo 50-225W
Lamp wattage 50…225 W
Line current 0.90 A
Input voltage DC 176…275 V
Power factor ? 0.95 
Operating frequency 50 kHz
Nominal output voltage 11.6 / 11.7 V
Input voltage AC 230…240 V
Mains frequency 50…60 Hz
System wattage 230.00 W
Input voltage range 207…264 V
Max. ECG no. on circuit breaker 10 A (B) 11
Max. ECG no. on circuit breaker 16 A (B) 18
Galvanic isolation primary/secondary 4.00 kV
ECG efficiency 95 %
Inrush current 1.5 A
Dimensions & weight
Length 170.0 mm
Width 44.0 mm
Height 34.0 mm
Cable cross-section, input side 2.5 mm²
Cable cross-section, output side 4.0 mm²
Wire preparation length, input side 14 / 8.0 mm
Wire preparation length, output side 14 / 8.0 mm
Mounting hole spacing, length 140.0 mm
Product weight 225.00 g
Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 80 °C
Additional product data
Design / version Long with cable clamp
Dimming method Trailing- or leading-edge phase control for inductive load dimmers
Overload protection Automatic switch off, reversible
Overheating protection Automatic switch off, reversible
Short-circuit protection Automatic switch-off, reversible
Max. cable length to lamp/LED module 2.0 m
Cable/wire types, input side H03VV-F 2x0.50 / H03VV-F 2x0.75 / H03VVH2-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 mm²
Cable/wire types, output side H03VV-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x1.5 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 / NYM-J 3x2.5 mm²
Dimmable Yes
Dimming range 0…100 %
No-load proof Yes
Suitable for fixtures with prot. class II
Suitable for emergency lighting Yes
Certificates & standards
Approval marks – approval ENEC 10 / VDE / VDE-EMC / EAC
Standards Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61047
Type of protection IP20
Geschik voor Wattage 50 tot 225W
Type Electronisch
Gerelateerde Producten